For all of your tuning needs and more! 828-221-0076828-221-0076 Power Stroke-Duramax-Cummins

Turbo Accessories

Turbo Accessories

8 Item(s)

per page

  • 94'-97' Banks Quick Spool Turbine Housing # 24450

    Banks developed the Quick-Turbo in conjunction with the Garrett Turbo and Ford/Navistar, to eliminate sluggishness "out of the hole" and produce strong acceleration. Quick-Turbo produces massive torque right from idle, achieves a higher peak faster, maintains more boost through the powerband, and doesn't over-boost. Learn More
  • BD Intercooler Boot and Clamp Kit

    Nothing can put an end to a hill climb or quarter mile pass faster than a turbo hose that blows off. Now, you can eliminate this problem with BD's hose and clamp kits. The Nomex silicone hoses can withstand over 100 psi of boost, and are secured by rugged, spring-loaded, stainless steel T-bar clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel. Learn More
  • CSD T4/T4i Turbo Mounting Kit

    The CSD T4/T4i Turbo Mounting Kit includes everything you need to mount your T4 or T4i style turbocharger on the 94.5-03 7.3L.

    Pipes will not be colored like displayed in the photo. They come un-coated.

     

    ALLOW 5-7 Business days to ship from CSD for non coated*

    ALLOW 2-3 weeks ship time for coated pipes. 

    *shipping times vary depending on parts availability

     

    Learn More
  • Driven Diesel Overboost Annihilator

    Features of the Driven Diesel "Overboost" Kit: •Completely Pre-Assembled and Permanently Pre-Set •High Quality Fixed-Pressure Industrial Pressure Regulator •Custom Stainless Steel Pre-Installed Mounting Bracket •High Quality Parker Push-Lok Fittings and Goodyear Hose •100% Accurate MAP Readings (up to pre-set max pressure) •100% Accurate Boost Gauge Readings (Mechanical Boost Gauges Only) ** devices that read/display boost from the MAP sensor will stop at the pre-set max of the Overboost Annihilator ** •ABSOLUTELY NO LOSS OF BOOST PRESSURE!!!!! Learn More
  • HFSB, QSSB and H2E Oil Feed Tube

    This is the Hypermax oil feed tube assembly used with the Hypermax H2E, Bell HFSB and Bell QSSB turbochargers. Learn More
  • HFSB, QSSB, H2E Turbo Oil Drain Line

    This is the Hypermax drain tube assembly and gasket used with the Hypermax H2E, Bell HFSB and Bell QSSB turbochargers. Includes new gasket to seal the surface at the turbos center section. Learn More
  • Hypermax Turbo Mount Kit (This item is drop shipped from the manufacturer)

    This turbo system is required to run our QSSB and HFSB turbochargers. This is a complete bolt-in system and includes the pedestal, oil feed and drain lines, up-pipes, down pipe, intercooler pipes, y-pipe, intake tube and misc. hardware. We would suggest that new lower up-pipe bolts and new exhaust donuts be purchased at your local Ford dealer, as those are not included with the kit. The stock clamp flanges at the manifold and the collector will need to be reused to secure the up pipes to the collector and the manifold. Also, the 4" intake tube that is included to run to your airbox is a direct fit for stock, AIS, Airaid Quickfit, and AFE Stage One style intake systems. If you're running an AFE Stage II or like system, some modification to the supplied intake tube my be required. Kit includes a 3.5" down pipe for improved low end torque, so an adapter may be required to connect to your current exhaust. This is the mount kit only, turbo not included. Learn More
  • MBRP 3 1/2" ID. to 4" OD. Exhaust Pipe Adapter #UA2007

    3 ½" ID. to 4"OD. Adapter Universal Aluminum Learn More

8 Item(s)

per page