For all of your tuning needs and more! 828-221-0076828-221-0076 Power Stroke-Duramax-Cummins

Turbo Accessories

Turbo Accessories

Items 1 to 10 of 15 total

per page

Page:
  1. 1
  2. 2
  • (99.5-03 7.3) Banks Big Head Wastegate Actuator

    When turbo exhaust backpressure increases, the stock actuator prematurely blows off the seat, softening boost in the midrange and killing torque. With twice the diaphragm area and spring pressure of the stock wastegate, Banks BigHead Wastegate Actuator keeps the valve seated longer and achieves a higher peak boost, sooner. At peak, BigHead opens the wastegate and holds its position, for precise boost control that gives you crisp acceleration and more mid-range pulling power. Learn More
  • 1999.5-2003 High Flow Turbine Outlet (This item drop ships from Driven Diesel)

    This high flow turbine housing outlet replaces the factory Exhaust Backpressure Valve (EBV) outlet on 99-03 7.3L Powerstroke Diesel Turbos (except van turbos). Elimination of the EBV will improve flow, reduce exhaust backpressure and help to lower Exhaust Gas Temperatures. This outlet is approximately 3.25" ID compared to the stock outlet which is approximately 2.75" ID. This high flow outlet will directly bolt on to the factory 99-03 truck turbo, the Garrett GTP38R Ball Bearing turbo and any other "drop in" style turbo that will accept the stock outlet flange. *Pedestal o-rings are now included with the NON-EVB pedestal *A note from DP-Tuner: All Fuel systems upgrades are DROP SHIPPED from our supplier's warehouse. 7-10 day delivery delay should be expected due to this being a specialty item. If you are needing this sooner please call us to check on their "in-stock" status. A tracking number will be forwarded to you by email as soon as we receive it. *Overnight shipping not available on these items. Learn More
  • 1999.5-2003 Non-EBV Pedestal (This item drops ships from supplier)

    This Non-EBV Pedestal from Garrett is a great addition when using our High Flow Outlet or a "gutted" stock outlet. This direct bolt-in replacement for the factory pedestal will eliminate leaks from the EBV actuator assembly and works with the factory turbo, the Garrett GTP38R Ball Bearing turbo, and any other "drop in" style turbocharger. Note: This pedestal does not include new o-rings. We do HIGHLY RECOMMEND replacing the Pedestal O-Rings when installing a new pedestal. You will need 2 packs. Price is adjusted for 2 packs. *A note from DP-Tuner: All Fuel systems upgrades are DROP SHIPPED from our supplier's warehouse. 7-10 day delivery delay should be expected due to this being a specialty item. If you are needing this sooner please call us to check on their "in-stock" status. A tracking number will be forwarded to you by email as soon as we receive it. *Overnight shipping not available on these items. Learn More
  • ATS Ported Shroud Compressor Housing 99.5-03 7.3 (Not for sale in the STATE of CALIFORNIA)

    If you live in California you will need to have this shipped to a NON California address. Please provide shipping address at check out in the gift message text box. The ATS Ported Housing offers significant advantages beyond a replacement compressor wheel. The upgraded housing with factory wheel actually flows more air than the "WW" replacements. This Ported Housing will only work on the 1999.5+ 7.3 trucks. Learn More
  • BD 7.3L Adjustable Wastegate Kit

    BD’s adjustable Waste Gate Kits keep the bypass valve closed, raising boost levels for increased performance and helping to prevent waste gate “creep”. These kits includes a high temperature resistant Nomex diaphragm with a heavier spring and locking jam nut for precise boost pressure settings. Fits 1999.5-2003 7.3L Power Stroke Learn More
  • BD 7.3L Billet Wheel #1047001

    BD’s new light weight Billet Milled 9-bladed extended tip Compressor Wheel has improved performance and response over our cast wheel design – the cast wheel for many years has satisfied customers for the application which eliminated a surging problem of the stock compressor wheel. BD’s adjustable Waste Gate Kits keep the bypass valve closed, raising boost levels for increased performance and helping to prevent waste gate “creep”. These kits includes a high temperature resistant Nomex diaphragm with a heavier spring and locking jam nut for precise boost pressure settings. Upgrading your stock 0.84 A/R turbine housing to the BD-Power 1.0 A/R housing will also increase performance by reducing back pressure and lowering EGT's. Fits 1999.5-2003 7.3L Power Stroke *DP-Tuner Highly recommends the Turbo be rebalanced when replacing the turbo wheel. Some customers have experienced some turbo surge after changing wheel. Learn More
  • BD 7.3L Stainless Bellowed UP-Pipes

    UpPipes for the 1999.5-2003 Ford 7.3L PowerStroke replace the factory exhaust feed system (exhaust manifold to the turbocharger) which is prone to leakage due to the deterioration of the exhaust crush donuts. The escaping exhaust and heat from the deterioration eventually burn out the feed pipes causing loss of turbo drive pressure and increased EGTs. The exhaust crush donuts with stainless steel gaskets for extended sealing life. New designed Stainless Steel piping with sizing to maximize transfer of heat energy to the turbo come with less restrictive, internally shielded expansion bellows that are not exposed to exhaust gases thus reducing the chance for burn out. The turbo Y-adapter is made from the same proven high-silicon ductile iron used to make our exhaust manifolds. The BD UpPipes are a durable, longer-life replacement for this common PowerStroke problem and is perfect as an upgrade while performing other engine or transmission repairs. Learn More
  • BD Intercooler Boot and Clamp Kit

    Nothing can put an end to a hill climb or quarter mile pass faster than a turbo hose that blows off. Now, you can eliminate this problem with BD's hose and clamp kits. The Nomex silicone hoses can withstand over 100 psi of boost, and are secured by rugged, spring-loaded, stainless steel T-bar clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel. Learn More
  • CSD T4/T4i Turbo Mounting Kit

    The CSD T4/T4i Turbo Mounting Kit includes everything you need to mount your T4 or T4i style turbocharger on the 94.5-03 7.3L.

    Pipes will not be colored like displayed in the photo. They come un-coated.

     

    ALLOW 5-7 Business days to ship from CSD for non coated*

    ALLOW 2-3 weeks ship time for coated pipes. 

    *shipping times vary depending on parts availability

     

    Learn More
  • Driven Diesel Intake Air Heater Delete Boost Gauge Install Kit (This item is drop shipped from Driven Diesel)

    Sometimes it's the "Little Things" that can make the difference between a just putting some parts together or completing a truly professional installation. We've installed enough gauge sets to know that most gauge manufacturers don't supply the parts necessary to properly install a boost gauge in todays diesel pickup trucks. We put together the Driven Diesel Intake Air Heater Delete Boost Gauge Installation Kit with the highest quality components we could find because we believe that it's the "Little Things" that count. *A note from DP-Tuner: All Fuel systems upgrades are DROP SHIPPED from our supplier's warehouse. 7-10 day delivery delay should be expected due to this being a specialty item. If you are needing this sooner please call us to check on their "in-stock" status. A tracking number will be forwarded to you by email as soon as we receive it. *Overnight shipping not available on these items. Learn More

Items 1 to 10 of 15 total

per page

Page:
  1. 1
  2. 2