Driven Diesel 6.0 Fuel Pressure Gauge Hose Kit (This item is drop shipped from Driven Diesel)

This kit allows the connection of a remote electrical Fuel Pressure Sending Unit (like the one provided with our AutoMeter Electric Fuel Pressure Gauges) or a remote under-hood mechanical fuel pressure gauge, to the Ford 6.0L Powerstroke Diesel. The provided adapter fitting installs in place of the plug in the fuel filter bowl and the hose allows the sending unit to be located off the engine (away from heat and vibration). The sending unit can also be located lower than the filter bowl (allowing any air bubbles to migrate back up to the filter so they don't affect the pressure reading). We typically route the hose and sending unit behind the airbox and battery tray near the drivers side of the engine compartment. Kit Features: • Filter Bowl Adapter Fitting • 30" Pre-Assembled S.S. Braided Teflon Hose • BLACK Protective Sleeve Over Hose • 1/8" Female NPT Gauge / Sending Unit Port • Schrader Valve to Bleed Air or Connect Mechanical Gauge • 45° Hose End for Better Clearance *A note from DP-Tuner: All Fuel systems upgrades are DROP SHIPPED from our supplier's warehouse. 7-10 day delivery delay should be expected due to this being a specialty item. If you are needing this sooner please call us to check on their "in-stock" status. A tracking number will be forwarded to you by email as soon as we receive it. *Overnight shipping not available on these items.