For all of your tuning needs and more! 828-221-0076828-221-0076 Power Stroke-Duramax-Cummins

Search results for 'egt'

Items 1 to 10 of 43 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Diamond Eye 4" Aluminized Turboback 6.0L F450 Power Stroke # K4353A-RP (Drop shipped from our Supplier)

    Turboback 4" aluminized exhaust system for the 6.0L F450 Power Stroke. Includes high flow muffler and mandrel bent pipe for better exhaust flow, EGT reduction, and good sound. Can also be order without muffler. Learn More
  • MBRP 4 inch T409 Stainless Steel Turbo Back Cool Duals Exhaust

    Each system consists of a 4" downpipe, 4" intermediate pipes, a high flow MBRP Inc diesel muffler with dual 4" tailpipes. High flow is the key to making power on the Powerstroke and these MBRP Inc systems deliver high flow. With the direct fit turbo flange, full mandrel bent tubing and one piece downpipe installation is a breeze. This system is a must for trucks that are, or intend to run an upgraded air intake system and chip. Horsepower and torque gains along with better fuel economy can be noted as well as a drop in EGT (exhaust gas temperature). Fits 1999-2003 F250/350 7.3 Includes polished stainless steel tips Learn More
  • Infinity Mini Accessory cable

    Infinity Mini accessory cable required for use with the EGT amp. Learn More
  • BD Performance Intercooler 99-03 7.3

    BD’s free flowing Charge Air Cooler (CAC) - or intercooler - design with streamlined external air passages improves engine cooling while offering less fan noise and less blade resistance, plus, improving engine power and efficiency of the radiator and air conditioning heat exchangers. Designed through testing at 100+ psi turbo boost pressure and 500oF turbo outlet temperatures, our extra thick cast end tanks with support struts have integrity and long life without ballooning and cracking. Stuffed Tube designs are commonly used on stock applications with boost pressures of 20-40 psi and 200-300 OF inlet temperatures. The tubes have a thin wall and 82% heat conductivity transfer. Higher boost pressures and temperatures will cause breaking of fin-to-wall welds resulting in tubes ballooning and reduced heat transfer. Micro Extruded Tube design is for applications producing 20-100 psi of boost pressure and inlet temperatures of 500+OF. The tubes have a 0.025” wall thickness and designed enhanced inner fins that add to performance and already strong support structure resulting in a 95% heat conductivity transfer. No cracking or separation occurred when tested at over 400 psi. The lower the turbo boost pressure drop across the CAC (inlet vs. outlet) the higher the volume flow — the more volume of air that can fl ow through the CAC and the higher the turbo boost pressure will result in lower exhaust gas temperatures (EGT). BD’s Cool-It CAC’s are designed for performance diesel engines. Learn More
  • Infinity Accessory cable

    Infinity accessory cable required for use with the EGT amp or the CEI-Hub Learn More
  • 03-07 F250/350 6.0 Performance Power Combo

    The 03-07 6.0L Performance Power Combo 

    Learn More
  • Infinity Pressure Sensor Kit

    Pressure Sensor Kit for Infinity Touchscreen

    Learn More
  • Infinity Temperature Sensor Kit 5226-2252

    Temperature Sensor Kit for Infinity Touchscreen

    Learn More
  • FFD Reman 180cc Injectors

    180cc Injectors- These are single shot injectors that flow 180cc with the choice of stock,30%, 80% or 100% sized 7 hole nozzle. These injectors are perfect for everyday driving and towing with minimal smoke and safe EGT's. A mild turbo upgrade like the Garret 38R or Bell HFSB, Driven Diesel Regulated Return fuel system and Terminator T500 high pressure oil pump will help improve results and allow maximum performance from the 160cc injector, but is not a requirement. Expect rear wheel horsepower around 375-425 with supporting modifications like intake, exhaust and performance chip. This item is made to order and drop shipped from our supplier. Custom programming changes are required for the single shot injectors. Injectors are drop shipped directly from Full Force.

    Each injector comes with a new nozzle, new *Tungsten coated plunger and barrel assembly, new springs, and as needed more internal wear parts are replaced if needed.  Flow tested and matched down to a 1% variation at idle and wide open flow.  New internal and external O-rings are installed.

     

    Click on the drop down arrow to choose your desired Nozzle size.

    Learn More
  • FFD New 180cc Injectors

    180cc Injectors- These are Brand New Alliant Power single shot injectors that flow 180cc with the choice of stock,30%, 80% or 100% sized 7 hole nozzle. These injectors are perfect for everyday driving and towing with minimal smoke and safe EGT's. A mild turbo upgrade like the Garret 38R or Bell HFSB, Driven Diesel Regulated Return fuel system and Terminator T500 high pressure oil pump will help improve results and allow maximum performance from the 180cc injector, but is not a requirement. Expect rear wheel horsepower around 375-425 with supporting modifications like intake, exhaust and performance chip. This item is made to order and drop shipped from our supplier. Custom programming changes are required for the single shot injectors. Injectors are drop shipped directly from Full Force.

    Learn More

Items 1 to 10 of 43 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5