Exterior Accessories
5 Item(s)
-
AMP Bed Step 1999 thru 2011 F250/350/450
The AMP Research BedStep is an ingenious way to access your pickup bed safely and conveniently. It is bumper mounted at the corner of your pickup bed and gives you easy access even when have a trailer hooked up. It hides under the rear bumper when driving then when you need it, it flips down with an easy push from your foot extending out and back to give you a solid, secure step. Anodized and Teflon® coated to resist corrosion Precision, stainless-steel pivot pins for rock-solid stability Rigid, non-slip, glass-reinforced composite step pad for safe footing even in mud, snow or wet conditions 300 Lb. load capacity Easy bolt-on installation takes less than 10 minutes using the vehicles existing bumper/frame mounting points. 3-Year/36,000 mile warranty The BedStep™ tailgate step, is a non-motorized step that folds up conveniently under the rear bumper when not in use, allows for easy access to the truck bed without interfering with the trucks ground clearance. Black anodized and powder coat finish for long-term durability. Rugged stepping platform supports up to 300 pounds of weight. Five-minute, easy bolt-on installtion.
Learn More$195.00 -
AMP Bed X-Tender 1999-2007 and 2008-2010
With the genuine AMP Research Bed X-Tender™ its like adding an extra 2-feet to your truck bed. From hay bales to Hondas, its there when you need it. And when you dont, it flips forward to keep your smaller cargo safe and organized. Crafted in the USA and backed by a 3-year/36,000 mile warranty, its incredibly light weight, yet strong enough to use as a convenient bench on the job, campsite, or track. Lightweight, super strong 6063 T6 aluminum alloy tubes Rugged glass-reinforced nylon composite uprights Instantly adds up to 2-feet of length to your truck bed Durable Black or Silver powder coat finish Easy to install and easy to remove 3-year warranty Made in USA AMP Research products are designed, engineered and exclusively manufactured by AMP Research in America Finish: Black or Silver powder coat finish Get more usable length from your pickups cargo bed with a Bed X-Tender™. Made of super strong aircraft-grade aluminum, this proven design is extremely lightweight, yet tough enough to use as a bench. Whatever you load in your truck, keep it secure with the original truck bed extender the Bed X-Tender™ designed, engineered and built by AMP Research.
Learn More$247.00 -
AMP Power Step 1999-2001, 2004-2007 F250/350/450, 2000-2005 Excursion
Amp Research Power Step running boards are triggered by an electronic signal from the vehicle's factory door sensors and extends to a convenient stepping height in one second. The Power Step running boards are powered by a heavy-duty, weatherproof motor. The Power Step is lowered when any door is opened and Power Step retracts when any door is closed. At the optimal ergonomic height for proper entry and exit without sacrificing ground clearance, it provides a natural step similar to steps found in your home. All Power Step running board components are OEM quality and corrosion-resistant for long service life. The Power Step is designed to operate normally in all weather conditions and is built to handle up to 600 lbs. per side. The AMP Research Power Step provides easy access. Open the door and the Power Step lowers to meet your feet. The Power Step supports up to 600 lbs. This heavy-duty, weatherproof step operates in climate extremes and won't catch on obstacles while you're driving. Made of OEM quality, corrosion resistant components. Quickly lowers in about one second with its weatherproof motor and anti-pinch technology. This is a must for those who want the convenience of a boost, without the blatant look of a traditional step. Lowers in one second when doors are opened. Neatly concealed; won't catch on obstacles or collect road grime. Activated by an electronic signal from truck's factory installed door sensors. 600 lb. load capacity per side. Weatherproof motor featuring anti-pinch technology. Operates in all weather conditions; tested at temperature extremes from -40 F to +200 F. OEM quality, corrosion resistant components. Includes wiring, mounting hardware, and instructions. Optional light kit now available THE AMP Research Power Step is the first fully automated running board available on the market. The AMP Research Power Step is triggered by an electronic signal from the vehicles factory door sensors and extends to a convenient stepping height in about a second. Powered by an encased motor that is mounted easily under the vehicle, the AMP Research Power Step lowers when any door is opened. Closed the doors and the Power Step sends the automatic running board retracting to its original position, so invisible, you'll never even know it was there. The step portion of the AMP Research Power Step is a painted aluminum extrusion and is capable of handling up to 600 lbs. capacity per side. The step itself is wide and flat allowing for good foot placement, and in the lowered position, it extends outward allowing occupants to take more of a natural step in or out of the vehicle. A no-slip textured surface allows for usage in all weather conditions. The AMP Research Power Step has been tested in a variety of environments and temperatures from -40F to +200F IMPORTANT NOTE: DIODES REQUIRED. 2004-2007 Ford Super Duty trucks without remote keyless plus 2001 and older Super Duty trucks with remote keyless entry require four (4) additional diodes that are not included in the standard parts kit. If needed, additional diodes Part #401.90 or Part # 10-02727-90 may be ordered at no charge and shipped UPS Ground by calling 1-800-983-2206. Light Kit is not compatible with 2002-2003 Ford Super Duty.
Learn More$1,114.53 -
AMP Power Step 2002-2003 and 2008-2011, F250/350/450
Amp Research Power Step running boards are triggered by an electronic signal from the vehicle's factory door sensors and extends to a convenient stepping height in one second. The Power Step running boards are powered by a heavy-duty, weatherproof motor. The Power Step is lowered when any door is opened and Power Step retracts when any door is closed. At the optimal ergonomic height for proper entry and exit without sacrificing ground clearance, it provides a natural step similar to steps found in your home. All Power Step running board components are OEM quality and corrosion-resistant for long service life. The Power Step is designed to operate normally in all weather conditions and is built to handle up to 600 lbs. per side. The AMP Research Power Step provides easy access. Open the door and the Power Step lowers to meet your feet. The Power Step supports up to 600 lbs. This heavy-duty, weatherproof step operates in climate extremes and won't catch on obstacles while you're driving. Made of OEM quality, corrosion resistant components. Quickly lowers in about one second with its weatherproof motor and anti-pinch technology. This is a must for those who want the convenience of a boost, without the blatant look of a traditional step. Lowers in one second when doors are opened. Neatly concealed; won't catch on obstacles or collect road grime. Activated by an electronic signal from truck's factory installed door sensors. 600 lb. load capacity per side. Weatherproof motor featuring anti-pinch technology. Operates in all weather conditions; tested at temperature extremes from -40 F to +200 F. OEM quality, corrosion resistant components. Includes wiring, mounting hardware, and instructions. Optional light kit now available THE AMP Research Power Step is the first fully automated running board available on the market. The AMP Research Power Step is triggered by an electronic signal from the vehicles factory door sensors and extends to a convenient stepping height in about a second. Powered by an encased motor that is mounted easily under the vehicle, the AMP Research Power Step lowers when any door is opened. Closed the doors and the Power Step sends the automatic running board retracting to its original position, so invisible, you'll never even know it was there. The step portion of the AMP Research Power Step is a painted aluminum extrusion and is capable of handling up to 600 lbs. capacity per side. The step itself is wide and flat allowing for good foot placement, and in the lowered position, it extends outward allowing occupants to take more of a natural step in or out of the vehicle. A no-slip textured surface allows for usage in all weather conditions. The AMP Research Power Step has been tested in a variety of environments and temperatures from -40F to +200F IMPORTANT NOTE: DIODES REQUIRED. 2004-2007 Ford Super Duty trucks without remote keyless plus 2001 and older Super Duty trucks with remote keyless entry require four (4) additional diodes that are not included in the standard parts kit. If needed, additional diodes Part #401.90 or Part # 10-02727-90 may be ordered at no charge and shipped UPS Ground by calling 1-800-983-2206. Light Kit is not compatible with 2002-2003 Ford Super Duty.
Learn More$1,114.53 -
AMP Power Step Extension Kit
This kit is for extra tall trucks. It provides and extra 2 inches of drop for the steps when deployed. Constructed from solid, machined billet aluminum with black anodized finished. Each kit contains 4 extension arms and all required hardware for easy bolt-on installation. Works best with lifted Ford Super Duty and Dodge Ram Trucks.
Learn More$75.00
5 Item(s)
