Intake Systems & Filters
6 Item(s)
-
AFE Cleaning Kit for Pro Dry S Filters
This eco-friendly air filter cleaner is for the aFe Pro Dry S performance air filter. Simply spray on and wash off and your Pro Dry S air filter is good to go. Please follow the instrucctions with the kit and you will have a lifetime of horsepower.
Learn More$10.89 -
AFE Direct Fit 08-10, 6.4L High Flow Replacement Filter
Constructed with 100% polyurethane on top and bottom, this high flow, oiled OE replacement performance filter will outflow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.
Learn More$72.00 -
AFE Filter Cleaning and Restore Kit Blue
The aFe filter restore kit comes with a aerosol bottle of aFe blue filter oil and a spray bottle of aFe filter cleaner. aFe filter oil is highly refined and helps capture the smallest debris. Recommended re-oiling every 20-30k miles. Please do not over oil the filter.
NOTE: This kit has an aerosol can. Aerosol cans cannot be shipped by any method other than Ground.
Learn More$10.89 -
AFE Filter Cleaning and Restore Kit Gold
The aFe filter restore kit comes with a aerosol bottle of aFe gold filter oil and a spray bottle of aFe filter cleaner. aFe filter oil is highly refined and helps capture the smallest debris. Recommended re-oiling every 20-30k miles. Please do not over oil the filter, please use instruction sheets below.
NOTE: This kit has an aerosol can. Aerosol cans cannot be shipped by any method other than Ground.
Learn More$10.89 -
AFE Ford PSD 08-10, 6.4L Stage 2 Intake System
This Stage 2 cold air intake system produces 18hp and 42lbs. x ft. torque and outflowed the factory intake by 24%. Enclosed in a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter that improves airflow for increased horsepower and torque. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. The clear coat anodized top provides a great style to your engine compartment.
Learn More$355.00 -
AFE Ford PSD 08-10, 6.4L Stage 2 Si Intake System
This Stage 2 sealed intake produces an incredible 28hp and 54lbs. x ft. torque while outflowing the factory intake by 41%. Fully sealed in a durable commercial grade designed rotomolded airbox, this air intake system features the ProGUARD 7 washable/reusable, high filtration conical air filter that provides maximum filtration with increased air flow. This intake system also features a heat-insulating molded plastic intake tube and a unique turbo adapter that funnels air into the turbo for improved volumetric efficiency for maximum performance. In addition, this system features an innovative Dynamic Air Scoop (D.A.S.) over the battery that efficiently channels additional air from the front grille into the air box reducing air intake temperatures by 25 degrees over the factory intake. The pre-oiled ProGUARD 7 performance air filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. Utilizing factory mounting points, this system is easy to assemble and easy to install. This intake is 50-state legal (CARB E.O Number D-550-4).
Learn More$457.00
6 Item(s)
