Intake Systems & Filters

AFE Cleaning Kit for Pro Dry S Filters

This eco-friendly air filter cleaner is for the aFe Pro Dry S performance air filter. Simply spray on and wash off and your Pro Dry S air filter is good to go. Please follow the instrucctions with the kit and you will have a lifetime of horsepower.
Learn More

AFE Cold Air Intake Stage 2, 03-07 Ford 6.0

This Pro Dry S Stage 2 cold air intake system produces 13hp and 67lbs. x ft. torque and outflows the factory intake by 52%. The patented design allows the battery to be turned to fit a massive air filter for industry leading performance gains. Enclosed in a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter that improves airflow for increased horsepower and torque. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. This intake is 50-state legal (CARB E.O Number D-550-4).
Learn More

AFE Direct Fit 03-07, 6.0 High Flow Replacement Filter

Constructed with 100% polyurethane on top and bottom, this high flow, oiled OE replacement performance filter will outflow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter. This is a direct stock box drop in.
Learn More

AFE Filter Cleaning and Restore Kit Blue

The aFe filter restore kit comes with a aerosol bottle of aFe blue filter oil and a spray bottle of aFe filter cleaner. aFe filter oil is highly refined and helps capture the smallest debris. Recommended re-oiling every 20-30k miles. Please do not over oil the filter.

NOTE: This kit has an aerosol can. Aerosol cans cannot be shipped by any method other than Ground.

AFE Filter Cleaning and Restore Kit Gold

The aFe filter restore kit comes with a aerosol bottle of aFe gold filter oil and a spray bottle of aFe filter cleaner. aFe filter oil is highly refined and helps capture the smallest debris. Recommended re-oiling every 20-30k miles. Please do not over oil the filter, please use instruction sheets below.

NOTE: This kit has an aerosol can. Aerosol cans cannot be shipped by any method other than Ground.

AFE Full Metal Intake 03-07 Ford 6.0

The Full Metal Power intake system takes air intakes to the next level. When it comes to performance filters size does matter. This bad boy starts off with a huge 9" x 7" x 8" oval Pro Dry S air filter for maximum intake volume with the convenience of no-oil recharging. The air then travels down an 4" mandrel-bent gun-metal grey anodized aluminum tube with mass air flow sensor pad that increases air velocity directly into the turbo for maximum horsepower, torque, turbo spool and throttle response. This kit comes complete with 1-piece powdercoated heatshield, intake tube, Pro Dry S air filter, urethane couplers and all hardware necessary for an easy installation. Don't be fooled by simple filter on a stick intakes, put your big boy pants on and step up and show your metal....Full Metal Power! We do offer the Pro Dry S filter cleaner that you spray on and wash off. See drop down menus below
Learn More

AFE Stage 2 Si Ford 03-07 F250/350 Diesel 6.0 Intake

This awesome new Stage 2 Sealed intake produces 19hp, 114 lbs. x ft. torque and outflows the factory intake by 119%. Fully enclosed in a covered molded plastic housing; this sealed air intake system features a washable/reusable conical air filter that improves airflow for increased horsepower and torque. The housing features an attractive black diamond plate cover with a lazer-cut logo name plate that provides ready access to the filter for servicing and an aggressive style. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract all the way to the turbo and directs increased air flow with improved volumetric efficiency for maximum performance. This intake features the patented Pro Guard 7 performance air filter that features 5-layers of progressive cotton gauze and 2-layers of synthetic media and has a 99.7% filter efficiency rating. The Pro Guard 7 filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.
Learn More

BD Performance Intercooler 03-07 6.0L

BD’s free flowing Charge Air Cooler (CAC) - or intercooler - design with streamlined external air passages improves engine cooling while offering less fan noise and less blade resistance, plus, improving engine power and efficiency of the radiator and air conditioning heat exchangers. Designed through testing at 100+ psi turbo boost pressure and 500oF turbo outlet temperatures, our extra thick cast end tanks with support struts have integrity and long life without ballooning and cracking. Stuffed Tube designs are commonly used on stock applications with boost pressures of 20-40 psi and 200-300 OF inlet temperatures. The tubes have a thin wall and 82% heat conductivity transfer. Higher boost pressures and temperatures will cause breaking of fin-to-wall welds resulting in tubes ballooning and reduced heat transfer. Micro Extruded Tube design is for applications producing 20-100 psi of boost pressure and inlet temperatures of 500+OF. The tubes have a 0.025” wall thickness and designed enhanced inner fins that add to performance and already strong support structure resulting in a 95% heat conductivity transfer. No cracking or separation occurred when tested at over 400 psi. The lower the turbo boost pressure drop across the CAC (inlet vs. outlet) the higher the volume flow — the more volume of air that can fl ow through the CAC and the higher the turbo boost pressure will result in lower exhaust gas temperatures (EGT). BD’s Cool-It CAC’s are designed for performance diesel engines.
Learn More

CFM+ Ford 6.0L 03-07 LargeMouth Intake Manifold Kit

This CFM+ model offers about 100 cfm more than our SmallMouth model. This kit is complete with new hoses, clamps and a custom bent steel pipe reduced on one end to fit your stock intercooler. The opening on this model is a large 3 1/2" diameter and is made from the same material as all the quality CFM+ intakes, which allow for the coolest flowing air as well. This LargeMouth Kit comes with a 3 1/2" opening and 3 ports pre-drilled,tapped and plugs installed. It also comes with a bent 3 1/2" steel intercooler pipe(reduced on one end), black hoses, clamps, installation manual, and all required hardware for mounting. Select Color Option below.
Learn More